Early October Shop Updates

Been working in shop more than posting this week, as I’ll be spending next week at the lake with family. I usually live at the lake Friday through Monday and at the shop Tuesday through Thursday – but after being gone two weeks racing, I had a shop thrash going on this week.

I picked up the rear bumper to my Magnum XE (I point out XE as I also have a black 79 GT) and installed.

The ten year old and squeaking serpentine belt was replaced with a shorter one that was required after changing the heads from iron to Edelbrocks. I took the car for a hard drive (110 mph to) to test the belt. While that’s good, the brakes were mushy and won’t lock up. They’ll have to be dealt with when I get back.

Almost 20 years ago I put the above Dakota Digital gauges in a custom dash panel for my Magnum XE. To me the Kool Factor has gone away. I ordered a Kustom set of gauges that I’ll install into a stock dash panel, after I scuff, sand, and paint flat black with plastic adhesive paint. I’m still thinking about what to do with the “Idiot Lights” on right side of dash panel, as the gauges handle that monitoring.

If you have a 75-79 B Body and want my old Digital dash panel with gauges, lights, and switches, its yours for $300.

Moving off the XE and on onto the Magnum GT. The leaky valve cover gaskets were replaced as was the sticky brake light switch that keeps draining the battery. I’ll detail and sell that car as part of my new “Reduce my foot print and make more simple” philosophy.

The 81 Imperial I’ve had since 1986 (I restored with a 380hp 360ci, street strip trans, 8.75″ with 3.55 gears…) had the AC, Power Seats and power antenna fixed. Found a gas leak when it was filled with 93 octane, and replaced the line. The gas tank and straps were new when I restored it many years ago. It now runs perfect and has zero issues. It too needs to be detailed so I can put up for sake when I get back.

The leaking gas tank in my 58 Dodge Pick up was repaired, and it too needs to be detailed and sold. Also in the photo is my trailer of three yards of mulch I picked up yesterday. That’s to keep my Shop Rat busy next week.

Speaking of the Shop Rat, he washed the Coach (above), sanded and painted the tongue of my old Aluminum trailer with POR15, and cut 2′ X 4′ shelves from 3/8″ plywood to replace shitty stock particle board shelves that have bowed and broken.

I put together a milk crate with two bottle jacks (one of them air) operated, an impact wrench, and sockets in my Stacker trailer. I have 150 psi air supply from the coach. I mounted a 50′ air reel to the compartment connection to reach the trailers. I’ve used once the air setup to change a Stacker tire, and it is now a no problem 10 minute job by me alone – compared the PITA Dallas and I use to go through.

I fixed the trunk seal on the Thug, and the Rat washed it. Waiting on the rear glass from Proglass. I’ll be tearing the trunk down over the winter for another coat of spatter paint and clear, and to polish the aluminum. The car also needs to go on the lift for the Rat to scrub the underside and for me to inspect and tighten suspension. I really hope to have the Screamin Woody ready as primary car for Bradenton, and for the Thug to go to back up duty. Maybe Dallas will run once or twice next year as his car is kn need of a total rebuild as he’s working too many hours to deal with it.

Speaking of Screamin Woody, the underside was painted and the rebuilt rear end and 4-link reinstalled.

The high HP 383 that will be going into my 60 Plymouth Post Street car is now finished. The engine compartment has been cleaned, scuffed, and is ready for Petty Blue paint. It will ultimately be wrapped to look like a sun bleached Petty NASCAR that has been left outside since 1961.

One of my all time favorite cars is a 1967 AMC Marlin. It is the rarest of the three years Marlins were made, and the only year made on AMC’s full-size Ambassador platform. The 65-66 were built on the shorter Rambler Rouge platform. They looked weird being that short of a fastback.

So I finally bought a nice southern 67 Marlin about 15 years ago. I drove it for a couple of weeks and then parked it to wait for a restoration. This week it got pulled out to be made running, before being tearing down to restore. It had no brakes, so they were replaced. The fuel pump was missing – don’t ask me how or why. Anyway the 67 for a 343 ci was a one year only, and impossible to find. The 68 was also a one year only, equally hard to find. Both have the fuel filter as part of the pump, one on top and the other on the bottom. Everything I found on the internet says only option is to replace with an electric pump. I was able to find a new 68 for a 343, and it works perfectly. Why isn’t that on any AMC forum? So car runs great, except for a whistle from a failing carb to intake gasket. I ordered the gasket, but it had to be removed so I would order the correct one. Engine uses  Motorcraft 2bbl carb. The GM distributor had the points replaced with a Pertronix electronic, but needs the gasket I ordered to test it. Once the car has been taken for a drive, it will be torn down. Engine compartment, interior, trim,… I’ll sent car to be repainted Red (always loved red with Black top Marlins), chrome to chrome shop, detail engine and covert to 4Bbbl. I need to see what interior I can locate in black. Based on that, I’ll decide if I will change to black or keep gold.

So that’s this past week at the shop.

 

Spread the love